Gleam Audio 2.2.0 came out on 8 November 2026. The main change is in Enhance: instead of running one set of steps on every file, it now asks what kind of recording you have and fills in the steps that suit it. This page covers what each preset does, what you can still set by hand, and the smaller fixes that came with the release.
What a preset changes
Enhance starts with Kind of recording. Pick one and the steps below it change to match. Basic is the old behaviour, so a file that sounded right before still sounds the same.
A preset leaves Target loudness where you set it. If you change any step by hand, the list shows Custom rather than the preset name, so you can see at a glance that this file no longer follows it.
The six kinds of recording
| Kind of recording | What Enhance does | Fits |
|---|---|---|
| Basic | Drops low rumble and evens out the volume | Any file where the old Enhance result was fine |
| Podcast | Removes some noise, adds a little clarity, evens out words, softens sharp s sounds | Speech recorded at home, close to a mic |
| Lecture or class | Removes noise, brings a far mic closer to even, shortens long pauses | A talk recorded from the back of a room |
| Voice-over or narration | Light noise removal, a tight even level, soft s sounds | Scripted narration for a video or an audiobook |
| Meeting or phone call | Removes as much noise as it can and lifts the voice | Calls and meeting recordings |
| Room with echo | Noise removal at full strength, which also tames some room echo | A bare room with hard walls |
When two presets look close, start with the one that matches how the file was recorded rather than how it sounds. A lecture recorded from the back of a room needs the far mic brought up. A podcast recorded close to the mic needs less of that and more of the s sounds softened.
Set each step by hand
Click Show advanced settings and the preset opens up into the steps it filled in. Each one can be changed on its own.
- Remove noise. Light, Medium or Full. This step runs before the others.
- Cut rumble below. Takes out low hum from traffic, fans and handling.
- Clarity. Lifts the part of the voice that carries the words, by 2 or 4 dB.
- Even out loud and quiet words. A gentle or firm compressor.
- Soften s sounds. Tames sharp hissing on s and sh.
- Shorten long pauses. Pauses over 1 second become half a second.
If the result sounds thin or watery, the noise removal is doing too much. Why noise reduction makes a voice sound robotic covers what to change, and the noise removal guide goes through the settings in more detail.
WAV results now keep the sample rate of the file you put in, so a 48 kHz recording comes out at 48 kHz rather than being converted on the way.
Repair clicks
Repair clicks is a new switch in Remove noise and in Enhance’s advanced settings. It is off until you turn it on.
It redraws only the few samples around each click, so the rest of the sound and the length of the file stay as they were. A keyboard, a mouse button, a chair or a pop from the mic all show up as short sharp spikes, and this is the switch for them.
Report an issue from the app
Report an issue is now in the sidebar, under Appearance. It sends a bug report, feedback or a question, and the reply comes to the email you give.
You can add a screenshot of part of the window. Drag a box over the part that matters and only that part is sent. The form lists everything that goes with the report before you press Send. It takes the place of Help › Send feedback.
Crash reports and where stats live
If usage stats are on, a crash is now sent with them, so a crash can be found and fixed. A crash that closes the app is sent the next time it opens. A tool that fails on a file also says which step broke.
File names, folders and your user name are taken out before anything is sent. The full list is in the privacy policy.
Usage stats and reports are now stored in the EU. Versions before 2.2.0 send their stats to the US until they update. Turning the stats off still deletes everything sent under your id, in both places.
Smaller changes
- The sidebar groups the tools under Speech and Tools.
- Arrow keys move between files in the file list.
- If part of the window fails to draw, you get a Reload button instead of a blank window.
Fixes in 2.2
- An mp3, m4a or flac file with cover art no longer fails to save as m4a. The art is kept in mp3, m4a, flac and mka, and left out of other formats.
- A video with more than one sound track now uses the first track in every tool.
- Stop ends the loudness step in Enhance at once.
- Play, pause, seeking and the Before and After switch fade in and out, so they no longer click.
Who 2.2 is for
The presets are for anyone who cleans the same kind of file again and again. A podcaster who records two people at home can leave Enhance on Podcast and stop rebuilding the steps. Someone who records lectures can pick Lecture or class and get the far mic lifted and the long pauses shortened without setting each one by hand. Voice-over work gets a tighter, lighter chain.
If you only ever process one kind of recording, 2.2 changes little beyond Repair clicks and the fixes. If you switch between kinds, the presets save the most time.
Is it free?
Yes, for personal use. Every tool is the same with or without a license, and the free tier covers 20 files a week. The presets are part of Enhance, so they are in the free tier too.
Work use needs a license. As of 13 November 2026, Basic is $10 and Max is $20, down from $25. Prices change, so check the pricing section before you buy.
How to update
Open Gleam Audio and click Check for updates in the sidebar. The full list of changes is in the 2.2.0 release notes and the 2.2 changelog entry.
If you are new to the app, the getting started guide covers the first file: drop it on the window, pick a tool, choose where the result goes and press Run.