Skip to content
Gleam Audioby purplecandy

Search the docs

Download Gleam Audio

Free for personal use, with every tool, up to 20 files a week. You only need a license for work.

Version 2.2.0 · Nov 8, 2026

Windows

macOS

Linux

Run this in a terminal to install it for your user:

curl -fsSL https://static.gleamaudio.com/gleam-audio/releases/latest/download/install.sh | bash

Or download a file below and install it by hand.

Windows packages are not code-signed yet, so SmartScreen will ask you to confirm: More info, then Run anyway. Every file has a checksum in SHA256SUMS.

Gleam AudiohomeGuide

How to Record a Lecture Students Can Actually Hear

A two minute setup for recording a lecture, where the room noise comes from, and the cleanup that makes the recording usable for revision.

By 4 min read


A lecture recording fails for boring reasons. The projector fan sits at the same level as the voice. The laptop is on the desk, so every keyboard press lands in the file. The speaker walks away from the microphone halfway through. None of these need better software to prevent. They need two minutes of setup.

This guide is the setup, the recording, and the cleanup in that order: what to do before you press record, what the app does to the file afterwards, and how to check the result before it goes to students.

What makes a lecture hard to hear

Three things, and they are worth separating because each has a different fix.

  • Steady noise. A projector fan, air conditioning, a fridge, a laptop fan, a hiss. It holds roughly the same level for the whole hour, which makes it the easiest kind to remove later. The app’s known limitations page says Remove noise is tuned for speech and names lectures among the cases it suits.
  • Distance. Every extra metre between the mouth and the microphone puts more room into the file and less voice. A voice recorded from the back of a hall cannot be fixed by a plugin, because the room is now part of the sound.
  • Level. Too quiet and the noise sits close to the voice. Too loud and the loudest word clips, and a clipped word cannot be repaired at all.

Fix distance first. It is free and it changes more than any setting.

Set up in two minutes

  1. Put the microphone where the voice is. On a lectern, clipped to a collar, or on a stand at the front. A phone on a desk in the middle of the room records the room first and the speaker second.
  2. Pick one input. If the room has a lapel microphone and a desk microphone, record both as separate files rather than mixing them. Gleam Audio’s Record tool takes a microphone or an audio interface and can write one file per mic, so you can choose the better take later instead of guessing.
  3. Watch the meter. Talk at your normal volume and set the input so the loudest words stay below the top of the meter. Leave room for a laugh or a raised voice.
  4. Kill what you can. Turn off notifications, move the laptop off the desk if its fan is audible, and switch off anything that hums if the room allows it.

Record the whole thing

Press Record and leave it running. Small mistakes are cheaper than a second take, because the file can be trimmed afterwards. Gleam Audio’s Cut and Split tools work on one file at a time: pick the file, mark it, run, and the other tools take the whole list at once.

If you are recording a series of lectures, name the files by date and topic as you go. It is the one part of the job that becomes painful later and costs nothing now.

Clean it before students get it

Order matters here. Clean the noise before you touch the levels, because adjusting volume also adjusts the noise.

  1. Remove noise. Play a second of a pause so the tool hears the room, then apply it. Start light. If the voice starts to sound like it is underwater, or begins to whistle on the s sounds, you have gone too far. That failure has its own explanation, and it is the most common way a lecture gets ruined after the fact.
  2. Remove silence. An hour of lecture is often closer to forty minutes of speech. Removing the long gaps, the setup at the start and the walk to the whiteboard makes the recording far easier to revise from.
  3. Enhance. This evens out the level so the student listening on a phone on a bus can hear the quiet sentences. Do it after the noise is gone, not before.
  4. Convert if the platform needs it. mp3 for most learning management systems, m4a for phones. The app converts between mp3, wav, m4a, flac, ogg and opus.

When the room wins

Cleanup cannot put back what was never recorded. If the speaker was more than a few metres from the microphone in a hard room, the result will sound distant and thin no matter what you apply, and pushing Remove noise harder will only add artefacts. In that case, record the next lecture closer and let this one be what it is. A clear, honest recording that sounds like a room beats a heavily processed one that sounds like a machine.

Recording a whole course

The app is free for personal use up to 20 files a week, which covers one course easily. If you are recording several classes a week, or you are setting this up for a department, the Education license is the right fit. It is free and never sold: 100 files a week, two computers, 18 months, for teaching, study and non-profit work. It is not for paid client work, and you apply by email with a handwritten note explaining what you will use it for. The free education license page has the details.

Check before it goes out

Listen to the first five minutes on a phone speaker, not on headphones. Headphones hide the room and flatter a thin voice. If you can hear every word on a phone, students will be able to on the bus. Then check the file plays at the start and the end, and that the format is one your platform accepts.

Questions

What is the best way to record a lecture?

Put the microphone as close to the speaker as the room allows, record one file per microphone, and watch the level meter so the loudest words do not reach the top. A phone on the front desk, six feet away, will record the room as loudly as the voice.

Can you remove the noise from a lecture recording afterwards?

Usually yes, for the steady parts: a projector fan, air conditioning, a hiss, a hum. Gleam Audio's Remove noise is tuned for speech, and the docs name lectures as one of the cases it handles. Noise that changes from second to second, like a chair scraping or a door, is a different job.

How do I record a lecture on a laptop?

Plug in a microphone or use the laptop's built in one, pick that input in Gleam Audio's Record tool, set the level so normal speech sits comfortably below the top of the meter, and press Record. A built in microphone picks up the keyboard and the fan, so keep it away from both.

Do teachers need a paid license to record lectures?

No. Gleam Audio is free for personal use up to 20 files a week, which covers a single course. The Education license is for coursework at scale: it is free for students, teachers and non-profits, allows 100 files a week on two computers for 18 months, and is applied for by email.

Comments


Gleam Audio Pro

Hey, we're working on something new. We're calling it Gleam Audio Pro: a multi-track editor for podcasts, lectures and narration. It's our take on an editor for busy creators, so you spend your time on the show, not the knobs.

Gleam Audio isn't going anywhere. It will keep getting updates and stay focused on one thing: studio-quality sound, without the studio.

Pro is coming to Mac and Windows. Join the waitlist →

By signing up you agree to the privacy policy.