Skip to content
Gleam Audioby purplecandy

Search the docs

Download Gleam Audio

Free for personal use, with every tool, up to 20 files a week. You only need a license for work.

Version 2.2.0 · Nov 8, 2026

Windows

macOS

Linux

Run this in a terminal to install it for your user:

curl -fsSL https://static.gleamaudio.com/gleam-audio/releases/latest/download/install.sh | bash

Or download a file below and install it by hand.

Windows packages are not code-signed yet, so SmartScreen will ask you to confirm: More info, then Run anyway. Every file has a checksum in SHA256SUMS.

Gleam AudiohomeGuide

Change Audio Speed Without Changing the Pitch

Make a recording play from half speed to double, keep the voice at its own pitch, and see when a speed change is the wrong fix.

By 5 min read


A recording rarely arrives at the pace you want. A lecture runs long, a voice note was spoken too fast to follow, a demo drags in the middle. Change speed moves a whole file faster or slower in one pass, and the voice keeps its own pitch, so nobody turns into a chipmunk on the way.

This guide uses Gleam Audio 2.2.0 (November 2026). It runs on your own computer, works offline, and has nine tools: Record, Remove noise, Remove silence, Change speed, Enhance, Cut, Split, Join and Convert.

What you need

  • The recording, in a common format such as wav, mp3, m4a, flac, ogg or opus.
  • Gleam Audio for macOS, Windows or Linux.
  • A video works as well as an audio file. Every tool takes mp4, mov, mkv, webm and avi for their sound, and the result comes back as audio only.

1. Open the file

Drop audio files on the window, or click Open Files. Then open Change speed.

The tool works on the whole file, so there is nothing to select inside it. Marking a section and changing only that is a different job, and the last section of this guide covers it.

2. Pick the speed

Speed runs from 0.5× to 2× in steps of 0.05. Under 1 is slower, over 1 is faster.

  • 0.5× is half speed. Use it for a passage you are learning, or a fast speaker you want to follow word by word.
  • 0.75× is a quarter slower. Enough to catch a mumbled word without stretching the file too much.
  • 1× leaves the file alone. Worth knowing: the slider starts at 1.25×, so set it back to 1 if you do not want the pace changed.
  • 1.25× to 1.5× is the range most people still follow comfortably for speech.
  • 2× is double speed. Good for a first pass through a long recording you only need to skim.

The default of 1.25× is deliberate. Most people listen to speech a little faster than it was recorded, and the tool opens where that job usually starts.

3. Save the result

Each result keeps its original’s format, with speed in the name, like lecture-speed.mp3. A video’s result is saved as m4a.

If the file has to come out in a different format, Convert writes mp3, wav, m4a, flac, ogg, opus and more, and keeps the cover art when the format can hold it.

The voice keeps its pitch

Playing a tape faster raises everything with it, so a voice climbs and sounds like a cartoon. Change speed changes how long the file is, not how high the voice sits. The person still sounds like themselves at 2× and at 0.5×.

That also means the tape effect is not on offer here. If the chipmunk sound is the point, this is the wrong tool, since the pitch is exactly what Change speed holds steady.

A faster lecture in two passes

For a lecture, an interview or a long meeting, this order saves the most time:

  1. Remove silence shortens the long pauses. Pick how long a pause must be to count, 0.5, 1 or 2 seconds, and how much of it to keep, a quarter or half a second.
  2. Change speed at 1.25× or 1.5× tightens what is left.

The two do different jobs. Remove silence drops dead air between sentences. Change speed compresses the sentences themselves.

Doing it in the browser instead

The free speed changer runs inside the page. Drop a file, pick a speed from half to double, and save the result as mp3 or wav. Quick picks sit at 0.75×, 1.25×, 1.5× and 2×, and the file never leaves your device.

Two limits come with a browser tool. The file has to be ten minutes or shorter, because the page holds the whole thing in memory. And it takes mp3, wav, m4a, flac and ogg only, saving mp3 or wav.

For a longer recording, use the app. It splits long files into parts on your computer and works on those.

When it won’t help

  • The picture goes. Every tool takes a video for its sound, and the result is m4a. If the picture has to keep pace with the new speed, that is a job for a video editor.
  • Sync breaks. A clip that has been sped up or slowed down no longer lines up with a separate video or a second recording. Fine for a standalone file, wrong for a multi camera edit.
  • Noise comes along for the ride. A fan, a hum or traffic rumble inside the recording is still there after the speed changes, only shorter or longer. Clean it first with Remove noise, then change the speed.
  • Levels do not fix themselves. A quiet recording stays quiet at any speed. Enhance is the tool that evens out the loud and quiet words.
  • 2× is the ceiling. Past double speed, speech stops being easy to follow, and the slider ends there anyway.
  • One sentence cannot be slowed on its own. Speed applies to the whole file. To change the pace of one part, Cut it out, change the speed of that piece, then Join it back.

What it costs

Free for personal use, with every tool, up to 20 files a week, on Mac, Windows and Linux. Work use needs a license: Basic is $10 and covers up to five computers. Max is $20 at 20% off its $25 list, with no weekly limit and no limit on computers. There is also a free Education license for students, teachers and non-profits, at 100 files a week on two computers for 18 months (prices as of November 2026).

Takeaways

  • Change speed makes a whole file faster or slower, from 0.5× to 2×, and the voice keeps its own pitch.
  • The slider opens at 1.25×. Set 1× if you want the file left alone.
  • The result is a new file with speed in its name, and a video’s sound comes back as m4a.
  • If the goal is to get through a long recording, remove the silence first, then change the speed.

Questions

Does changing the speed change the pitch?

No. Change speed makes a file play faster or slower and the voice keeps its own pitch, so nobody turns into a chipmunk at 2× or a slow rumble at 0.5×.

How fast can a recording go?

Twice as fast. Speed runs from 0.5× to 2× in steps of 0.05, so 1.95× and 1.05× are both available, and the default is 1.25×.

Can I slow a recording down?

Yes, to half speed. Set Speed below 1, like 0.75×, and the file plays slower at the same pitch.

Does it work on video?

Every tool in Gleam Audio takes video files such as mp4, mov, mkv, webm and avi for their sound. The result is audio only, saved as m4a.

Can I change the speed without installing anything?

Yes. The free speed changer at /tools/change-audio-speed/ runs in the browser, takes files up to ten minutes, and saves mp3 or wav.

Comments


Gleam Audio Pro

Hey, we're working on something new. We're calling it Gleam Audio Pro: a multi-track editor for podcasts, lectures and narration. It's our take on an editor for busy creators, so you spend your time on the show, not the knobs.

Gleam Audio isn't going anywhere. It will keep getting updates and stay focused on one thing: studio-quality sound, without the studio.

Pro is coming to Mac and Windows. Join the waitlist →

By signing up you agree to the privacy policy.