Most people asking this question are standing in front of a page of microphones, wondering which one to buy. The microphone is not the thing that decides whether the first episode is listenable. A microphone a metre away from a mouth in a room with bare walls records the room, and no plugin puts the voice back. A cheap microphone close to the mouth, in a room with a sofa and curtains, beats an expensive one across a table.
So this is the stack in the order it pays to spend, cheapest and highest impact first. Two of the five things are free, and one of those you probably own already.
The five things a first episode needs
- A room that does not echo. Soft furnishings and a short distance between mouth and walls.
- A microphone you can put close to your mouth. Any working microphone, positioned well.
- Headphones, so you hear what the file actually contains.
- Software that records and cleans the file. Gleam Audio is free for personal use, and it covers the record, cleanup and export steps.
- A host that gives you an RSS feed, so directories can find the show.
Start with the room, not the gear
A hard room adds a short echo to every word. You hear it as a hollow, boxy sound, and it cannot be removed afterwards because it is mixed into the voice itself.
- Speak across the short side of the room, not down its length. Two metres of air behind you is better than six.
- Curtains, a rug, a sofa, a bed, a bookshelf with books on it. All of these absorb the reflections that make a room sound bare.
- If the room is still lively, hang a duvet or a thick blanket behind the microphone, out of shot. It is the cheapest acoustic treatment there is.
- Clap once and listen. A sharp clap with a long tail is a room that will colour the recording.
This is also the part people skip because it is not a purchase. It changes the result more than any setting.
A microphone, close enough to matter
Distance and angle do the work. Put the microphone a hand’s width from your mouth, slightly off to one side so the puffs of air from p and b miss the capsule, and keep it on a stand or boom rather than holding it.
What that means when you are buying:
- A cardioid USB microphone plugs into the computer with one cable and rejects most of what is behind it. That is enough for a first show.
- A phone works to begin with, held close, but not lying on the desk where every tap lands in the file.
- A laptop’s built in microphone picks up the keyboard and the fan. Use it for a test, not for an episode.
Whichever you use, set the input level so your loudest words stay below the top of the meter. A quiet recording can be made louder later. A clipped one cannot be repaired. The free mic test shows what your input sounds like in the browser before you commit to a take.
Headphones, so you hear the real file
Closed-back headphones, or earbuds that seal. Not laptop speakers, which hide hiss and flatter a thin voice. If you want to hear your own voice naturally while you talk, wear one side only and leave the other ear open.
Listen back to a thirty second test with the headphones on. If you can hear the fridge, the fan or the traffic, the recording can hear it too, and it is easier to move or switch off now than to clean later.
Software: record, clean, export
You need two jobs done and they can be one app. Record the take, then clean it up and export an mp3 the host accepts.
Gleam Audio does both, offline, on Mac, Windows and Linux, and all nine tools work free for personal use up to 20 files a week. The tools are Record, Remove noise, Remove silence, Change speed, Enhance, Cut, Split, Join and Convert. Record takes a microphone or an interface and can write one file per input, so two hosts recorded separately can be balanced against each other afterwards. Every tool also takes video files, mp4, mov, mkv, webm and avi, and saves the audio.
If you want to test the workflow before installing anything, the free online voice recorder records a short take in the browser. A full episode belongs in the app, because it works on a folder of files at once and never uploads your audio.
You do not need a full digital audio workstation to start. If you already use one, keep it. If you are choosing, the comparison of Gleam Audio and Audacity covers where each one fits.
Clean it up in this order
Order matters. Levels change the noise, so remove noise first, then adjust loudness.
- Remove noise. Play a second of a pause so the tool hears the room, then apply it. Start lighter than you think you need. If the voice starts to whistle on the s sounds or sound like it is underwater, you have gone too far, and that failure has its own explanation.
- Remove silence. The gaps between sentences, the setup at the start and the walk to the kitchen in the middle. Most first episodes lose several minutes here and sound tighter for it.
- Enhance. This evens out the level so someone listening on a phone on a bus can hear the quiet sentences.
- Cut and Split. Trim the false start, split the episode into sections if you want chapters.
- Convert to mp3. Most hosts and directories prefer it. The free mp3 converter handles one file; the app’s Convert tool handles the folder.
Before you export, check the loudness. Podcasts sit around -16 LUFS, and the free LUFS meter measures a file in the browser. The LUFS page explains the target and why platforms normalize what they receive.
A host and an RSS feed
A podcast is an RSS feed listing audio files, and directories read that feed. A host stores the files, writes the feed and gives you an address to submit to the directories, including Apple Podcasts and Spotify.
Prices and free tiers among hosts move constantly, so compare them on the day rather than trusting a list. What is worth checking before you commit:
- Episode size limit. An hour of uncompressed audio is large. mp3 at a sensible bitrate is not.
- Your own feed address. If you ever move hosts, you want to keep the feed URL, so subscribers follow you.
- Whether the free tier is time limited. Some hosts let you publish free for a while and then charge.
- Download numbers, since that is the only measurement most small shows get.
You do not need a domain name, a website, a logo or a theme tune before the first episode. Those help later. The feed is what makes it a podcast.
What you do not need yet
The list people buy before episode one, and the reason:
- A mixer or audio interface. One microphone is one input. A USB microphone needs neither.
- An XLR microphone and a preamp. More cables, more to go wrong, no better a first episode.
- Foam panels on every wall. Soft furnishings in a small room get most of the way there.
- Paid editing software. Cleanup and trimming are the whole job at this stage.
- A second microphone for guests. Record the guest on a phone close to their mouth and sync later, or wait until the show has an audience.
- Ads, sponsors and a media kit. None of it exists before there is a listener.
The first episode will still sound like a room
It will. Shows you like are recorded in treated rooms by people who have done it for years, and comparing your first take to their hundredth is the fastest way to give up.
Compare episode ten to episode one instead. Keep the raw files, so you can hear what changed. And resist the urge to push Remove noise until the room disappears, because that is how a voice ends up sounding synthetic. A slightly roomy recording of a person talking beats a silent, processed one.
A stack you can start this week
- Pick the smallest room with the most soft things in it.
- Use the microphone you have. If you are buying one, a cardioid USB microphone on a stand is enough.
- Put your headphones on and record a thirty second test.
- Install Gleam Audio and record the first episode in it, one file per person.
- Remove noise, remove silence, enhance, then convert to mp3.
- Open a host account, upload, and submit the feed to the directories.
The free personal license covers 20 files a week, which is more than a weekly show needs, so a beginner does not have to pay anything to publish. A license is for work: a monetised show, client audio, or audio you are paid to produce. The tiers are Basic at $10, Plus at $15 and Max at $20 against a $25 list price, one time, with no subscription.
If you are a student, a teacher or a non-profit, there is a free Education license instead. It is free and never sold: 100 files a week, two computers, 18 months, for teaching, study and non-profit work, not paid client work. You apply by email to support@gleamaudio.com with the subject Free license request and a photo of a handwritten note explaining what you will use it for. The free license page has the details.
Before the episode goes out, run the short podcast recording checklist over the file. It is one page, and it catches the mistakes that are cheap to fix at the desk and expensive to fix after publishing.